To connect the Poly Voyager Focus 2 UC headset to your computer, follow these steps:
Connecting via Bluetooth
- Turn On the Headset:
- Press and hold the power button on the headset until you see the LED light turn on and start flashing blue. This indicates that the headset is in pairing mode.
- Activate Bluetooth on Your Computer:
- On Windows: Go to Settings > Devices > Bluetooth & other devices. Make sure Bluetooth is turned on.
- On macOS: Open System Preferences > Bluetooth and ensure Bluetooth is turned on.
- Pair the Headset:
- On your computer, click on Add Bluetooth or other device (Windows) or Connect (macOS).
- Select Bluetooth from the options.
- Look for Poly Voyager Focus 2 UC in the list of available devices and click on it to pair.
- Complete Pairing:
- Once paired, you may hear a confirmation tone or see a message indicating the headset is connected. The LED light on the headset will usually stop flashing and remain steady.
- Set as Default Audio Device:
- On Windows: Go to Settings > System > Sound and select Poly Voyager Focus 2 UC as the default input and output device.
- On macOS: Open System Preferences > Sound and choose Poly Voyager Focus 2 UC under both the Input and Output tabs.
Connecting via USB (Using the USB Bluetooth Adapter)
- Plug in the USB Bluetooth Adapter:
- The Poly Voyager Focus 2 UC often comes with a USB Bluetooth adapter (dongle) for easier connectivity. Plug this adapter into an available USB port on your computer.
- Turn On the Headset:
- Press and hold the power button until the LED light turns on and starts flashing blue to indicate pairing mode.
- Automatic Connection:
- The USB Bluetooth adapter should automatically connect to the headset. This process may take a few moments, and you might see a notification on your computer indicating that a new device has been connected.
- Set as Default Audio Device:
- On Windows: Go to Settings > System > Sound and select Poly Voyager Focus 2 UC as the default audio device.
- On macOS: Open System Preferences > Sound and select Poly Voyager Focus 2 UC for both Input and Output.
Troubleshooting Tips
- If the headset does not connect: Make sure it is within range of the computer and that Bluetooth is enabled. Try restarting both the headset and the computer.
- Update Drivers: Ensure that your computer’s Bluetooth drivers are up to date.
- Check Compatibility: Confirm that the Poly Voyager Focus 2 UC is compatible with your computer’s operating system.
By following these steps, you should be able to successfully connect your Poly Voyager Focus 2 UC headset to your computer, whether through Bluetooth or the USB adapter.
